Computational Infrastructure for Geodynamics Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
These pages show the results of performance tests for different dynamo codes on the [[https://www.tacc.utexas.edu/user-services/user-guides/stampede-user-guide|TACC XSEDE Stampede system]].

To clarify terminology, here are some definitions of terms used in the measurements:
  * Node: On Stampede, each node contains //2 Xeon E5-2680// processors, each with 8 cores, for a total of 16 cores per node.  Each node also has //32GB 8x4G 4 channels DDR3-1600MHz// of memory, 
  * Core: A single core in a processor.
  * MPI processes: 
  * Thread: An OpenMP thread. Unless otherwise specified processor thread affinity is not enabled.
  * SU: Service unit, a unit of usage accounting equal to //#cores x #hours//. Usage is billed by the node, so using 8 of 16 cores in a node for 1 hour will be recorded as 16 SUs rather than 8 SUs.

All timings are measured in terms of wall time unless otherwise specified. They are measured using ''MPI_Wtime()'' (If program does not use MPI, ''system_clock(itime, irate, imax)'' is used). The time for one step is determined by taking the mean of the elapsed time for 100 time steps.

[[wg:geodynamo:Performance_results:Calypso|Calypso Ver.1.1]] \\
Status: Three cases should be tested again \\

[[wg:geodynamo:Performance_results:Calypso_Latest|Calypso latest Ver.]] \\
Status: Two cases are missing and three cases should be tested again \\


[[wg:geodynamo:Performance_results:GeoFEM|GeoFEM-MHD]] \\
Status: Done \\

[[wg:geodynamo:Performance_results:ETH|ETH code (not finished)]] \\
Status: Having a problem to generate initial field. Asking to authors. \\

[[wg:geodynamo:Performance_results:Dennou|SPmodel(GFD-dennou code) (not finished)]] \\
Status: Strong scaling is done. Discussing with authors \\

[[wg:geodynamo:Performance_results:Goddard|Goddard code]] \\
Status: Ask a routine to generate initial field

[[wg:geodynamo:Performance_results:H2000|H2000]] \\
Status: Done \\

[[wg:geodynamo:Performance_results:IPGP|Parody(IPGP JHU code)]] \\
Status: Done \\

[[wg:geodynamo:Performance_results:LSD|LSD (Leeds code)]] \\
Status: Sending the report to authors \\

[[wg:geodynamo:Performance_results:MagIC|MagIC]] \\
Status: Done \\

[[wg:geodynamo:Performance_results:MagIC5|MagIC5 (not started)]] \\

[[wg:geodynamo:Performance_results:SFEMANS|SFEMANS (not finished)]] \\
Status: Strong scaling is done. Discussing with authors for warnings and changing resolutions \\

[[wg:geodynamo:Performance_results:Busse|simitev-busse-drs]] \\
Status: Strong scaling is done with $l_{max} = 128$. Simulations fail more than $l_{max} = 192$.

[[wg:geodynamo:Performance_results:Gary|UCSC-Glatzmaier code]] \\
Status: Strong scaling is done.

[[wg:geodynamo:Performance_results:Gary_Latest|UCSC-Glatzmaier code (New Version)]] \\
Status: Code received.

[[wg:geodynamo:Performance_results:xshells|xshells]] \\
Status: Done, need to communicate with authors. \\

[[wg:geodynamo:Performance_results:TITECH|TITECH code (not started)]] \\

[[wg:geodynamo:Performance_results:Comp|Comparison among codes]] \\
Computational Infrastructure for Geodynamics Wiki

User Tools

Site Tools

Page Tools
